The SOLID SHINE Laser Advantage
Bright and Vivid Picture Quality from 3-Chip DLP™ SOLID SHINE Laser
Combining 3-Chip DLP™ imaging with original SOLID SHINE Laser Phosphor technology, Panasonic 3-Chip DLP™ SOLID SHINE Laser Series produces vividly colored pictures rich in detail with excellent brightness. Solid-state laser light sources and specially engineered heat-resistant phosphor wheels work together with three discrete DLP™ modules (R/G/B) for high brightness, true color accuracy, and high contrast in large venues.
Precision Color Reproduction
3-Chip DLP™ SOLID SHINE Laser projectors capture a more accurate color space than comparable laser projectors. Blue lasers ensure greater precision while an expanded color gamut improves white-balance accuracy.
Lower Total Cost of Ownership
Projector delivers up to 20,000 hours*1 maintenance-free service at full power with no filters to clean or replace*2 thanks to a fully sealed optical block and redesigned air intake. Energy consumption has also been reduced.
*1 At this time the brightness will have decreased to approximately half of its original level. Please refer specification for detail condition.
Filter Replacement Period:
Supplied Filter: 2,000 hours (High Mode), 4,000 hours (Normal Mode)
Long Life Filter: 4,000 hours (High Mode), 20,000 hours (Normal Mode)
2 Usage environment may affect filter maintenance cycle.
Dual-Laser Optical Engine Assures Failsafe Reliability
Dual-Drive Laser Optical Engine groups laser diodes into two discrete modules. A redundancy circuit works to minimize brightness- and color-uniformity loss should a laser diode fail, making supported products ideal for applications where picture presentation must be maintained.
Dustproof Optics Extend Longevity
Hermetically sealed laser modules and a refined air-intake system work to extend life and maintain picture quality in dusty locations. SOLID SHINE Laser products are tested against more severe guidelines than other projectors for stable operation in dusty environments containing 0.150 mg of particulate matter per cubic meter*.
* Dustproof tests are conducted to confirm operational effectiveness under conditions with 0.15 mg/m3 of particulate matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ASHRAE], and the Japanese Building Maintenance Association). Measurements are made using acceleration tests.
Efficient Cooling System Enhances Reliability
A liquid cooling system for the light source features a new air intake and solid aluminum radiator to suppress temperature rises, allowing stable operation in high temperatures while reducing noise*.
* Please refer to product specifications for more details.
Optional Long Life Filter for 20,000-hour Service-free Operation
Long Life Filter includes an electrostatic Micro Cut Filter to collect minute dust particles with an ion effect. Combined with a dust-resistant cabinet, this enables 20,000 hours* of projection with no maintenance.
* Please refer to the specification for detail condition.
Image Quality and Reliability
Quad Pixel Drive Goes Beyond 4K
Better-than-4K resolution is achieved by employing a high-speed 2560 x 1600-pixel (WQXGA) DMD chip that shifts each pixel vertically and horizontally, quadrupling the pixel-count. Working in concert with Real Motion Processor 240 Hz frame-creation, Quad Pixel Drive technology produces film-like 5120 x 3200-pixel (4K+/16:10) images. As well as silk-smooth video, this powerful processing engine renders text in the finest detail for lectures and presentations.
Pixel Quadrupling Technology
Shifting pixels vertically and horizontally creates ultra-high-resolution pictures that exceed standard Ultra HD resolution.
Real Motion Processor
High-speed 240 Hz frame creation supports images up to 5120 x 3200 pixels (16:10) resolution.
* Resolution 5120 x 3200 pixels (maximum physical resolution).
240 Hz Real Motion Processor Reduces Motion Blur
Real Motion Processor uses sophisticated algorithms to create three additional frames for each image, boosting native 60 fps footage to 240 frames per second*1. The result is smooth and realistic motion rendering, particularly useful for broadcasting sporting events and other fast-paced video. Further, images can be displayed with SDI, DVI-D, and HDMI simultaneous inputs*2. A refined optical engine enhances focus performance for a lifelike sense of resolution, contrast, and fluidity.
*1 Refresh rate varies depending on vertical scanning frequency. Note that 240 Hz frame rate is downsampled to 60 Hz when projecting at 4K+ resolution.
*2 Geometric Adjustment and Upgrade Kit functions are not supported with simultaneous video signal input.
Detail Clarity Processor 5+
Panasonic’s next-generation circuit technology analyzes individual images frame by frame to clarify areas containing fine details and textures. Algorithms extract hidden information from super-high to low-frequency video bands, sharpening outlines, correcting contours, and reducing ringing noise to improve the sense of resolution. The technology includes an exclusive Refine Enhancer algorithm to further optimize detail reproduction in 4K+ images.
Dynamic Contrast Function for High 20,000:1 Contrast
Direct laser power output modulation achieves high contrast with less power consumption. Digitally controlled frame-by-frame scene-linking modulation ensures precise output adjustment, while accurate 20,000:1* contrast is delivered even when bright and dark scenes frequently interchange.
* Please refer to the specification page for detail condition.
System Daylight View 3
Panasonic’s premium System Daylight View 3 stops pictures washing out in bright light and enhances impact in mapping and multi-projector applications. It uses sensor information to adjust sharpness, manipulate gamma curves, and correct colors to suit on-site conditions.
Selectable Operational Modes
Select your preferred operational mode to balance brightness decline with brightness output according to the specific requirements of individual applications.
Supports BT.2020 and HDR for Latest 4K Standard
An emulation mode for BT.2020, a 4K color-space standard, reproduces a wider color gamut than conventional Rec.709 standard. Additionally, the projectors support HDR (High Dynamic Range). Ultra-high-resolution image reproduction is truly stunning, from deepest black to sparkling bright highlights.
90 % Brightness Uniformity
SOLID SHINE Laser delivers superior screen brightness uniformity thanks to highly accurate white balance control. Brightness uniformity is greater than 90 % when measured at the corners, edges, and center of the screen.
Installation Flexibility and Powerful Functionality
Free 360-degree Installation
SOLID SHINE Laser technology enables free 360-degree installation through any axis. Together with powered lens shift and a wide range of optional lenses, the projector can be mounted in any way desired without picture distortion temporarily or in permanent applications.
Contrast Sync and Shutter Sync Function
Contrast Sync function, designed for multi-screen applications, allows dynamic contrast control to be synchronized for consistent picture quality across screens. Shutter Sync, meanwhile, synchronizes shutter on/off timing.
* Includes fade-in and fade-out effects. Projector shutter functions can be set to operate individually if desired.
Single-Cable 4K DIGITAL LINK Connection
Based on HDBaseT™ technology, DIGITAL LINK supports transmission of video, audio*1, and control commands through a single CAT 5e or higher STP cable for distances of 150 m (492 ft) for Full HD video and 50 m (164 ft) for 4K*2 video. An optional DIGITAL LINK Switcher or Digital Interface Box further simplifies installation in large venues while reducing cost and improving reliability.
*1 Audio transmission depending on model’s audio capability.
*2 ET-YFB200G/YFB100G is not compatible with 4K signals. 150 m (492 ft) transmission available only with ET-YFB200G DIGITAL LINK Switcher for signals up to 1080p in Long Reach Mode.
Backup Input Setting Assures Picture Display
Projectors switch instantaneously to a backup input signal should the primary input signal be disrupted*, assuring image display is maintained at all times in venues such as control rooms and adding insurance at events where projection must not be interrupted.
* Combination of primary/secondary input terminals is fixed. Switching to secondary input (or primary input) occurs automatically when the input signal for primary input (or secondary input) is disrupted. The Backup Input Setting is enabled only when the input signal to primary and secondary terminals is the same.
Geometry Manager Pro Software and Upgrade Kits
Geometry Manager Pro software expands image-adjustment functionality and makes complex multi-screen setup easy. The free software includes color matching, edge blending, and many other functions via network. An optional ET-UK20 Upgrade Kit for Geometry Manager Pro adds uniformity correction and numerous creative masking capabilities, while the optional ET-CUK10 Series*1 kit activates an Auto Screen Adjustment plug-in, allowing automatic and simultaneous setup of multiple projectors. The plugin performs multi-screen and curved-screen calibration in three quick steps using a camera*2 and PC connected to the network, simplifying adjustment, edge blending, color matching, stacking, brightness, and black level setup.
Early Warning Software ET-SWA100 Series (Optional)
Early Warning Software monitors the status of projectors and displays connected to an intranet, and informs the operator when an abnormality is detected or predicted, or when there are symptoms of trouble. This minimizes downtime to provide more stable operation.
Common Lenses for Panasonic 3-Chip DLP™ Projectors
Panasonic 3-Chip DLP™ projectors share a range of optional lenses, including ultra-short-throw lens and zoom lens for long throw distances, reducing cost of ownership for staging and event companies with large projector inventories.
Eyebolt-ready for Crane Installations
Eyebolts allow the projector to hang from a crane, simplifying rigging at large event venues for rental/staging professionals.
|Native Resolution||WHXGA (5120x3200)|
|Projection Size||22.9mm (0.9 inches) diagonal|
|Throw Ratio||1.78-25.4 m (70-1,000 "|
|Lamp Type||Laser x 2|
|Lamp Life||18,000 hours (when installed in high-brightness mode) 20,000 hours (when installing the operating mode to the normal position) about 43 to 800 hours at a constant brightness DURABLE mode 1, approximately 61 to 320 hours at a constant brightness DURABLE|
|Dimensions (WxDxH)||700 x 418 x 1.250 mm (with the shortest legs in position)|
|Power Consumption||2950 W (about 0.3 watts in the sleep mode when set to ECO mode 4 watts in the sleep mode during the installation in normal mode) Average power consumption (Varies depending on the operating mode settings): 2,400 W when the mode of work in the position|